Operation; Before You Begin; Power On; Starting The Drives - Intel SS4200-E - Entry Storage System NAS Server User Manual

3

Operation

Before You Begin

Before powering up the Intel
are correctly installed and locked down.

Power On

Caution: Do not operate the Intel
within the specified operating range. If the drives have been recently installed, ensure they
have had time to acclimate before operating them.
Note: See "Front Panel LEDs and Switches" on page 12
related fault conditions.
Apply AC main power to power on the system.
The Power/Status push-button on the Front Panel will light up a constant blue once power
is activated and system is operational. The disk drive motors will also start running.

Starting the Drives

All drives in the chassis should automatically start their motors during power on. If this
does not occur then there may be a power problem.

Disk Drive Status LEDs

Each disk drive has a corresponding status LED on the Front Panel. See
States" on page 12
Convention" on page 9
Intel® Entry Storage System SS4200-E User Guide
®
Entry Storage System SS4200-E ensure that all disk drives
®
Entry Storage System SS4200-E until the ambient temperature is
for information on illumination states. See
for positional order of disk drives.
for details on Front Panel LEDs and
"Front Panel LED
"Disk Drive Numbering
11