Power Supply; Power Supply Output Loom; Cooling Fans; Drive Retention Assembly - Intel SS4200-E - Entry Storage System NAS Server User Manual

Power Supply

AC-DC power is provided by an enclosed power supply with specific load capability,
mechanical packaging and output loom to suit this product.
The power supply voltage operating ranges are nominally 100V - 240V AC, selected
automatically.

Power Supply Output Loom

The power supply output loom provides the following outputs:
•
P1 system board main power connector (24 pin)
•
P2 processor power connector (4 pin)
•
P3, P4, P6 and P7 peripheral power connector (4 x 5-pin)
•
P5 IDE DOM connector (4 pin)

Cooling Fans

Two high-speed single-rotor fans are located at the rear of the enclosure.
Airflow is front to rear with cooling air being drawn across the drives, through the fans
and exiting the rear of the chassis. Perforations at the rear of the chassis allow cooling air
to flow over the processor heatsink and system board.

Drive Retention Assembly

The drive retention assembly consists of a "gull wing" design assembly mounted via a
pivot point in the center of the chassis. Each side of the drive retention assembly can
house two low-profile, 1.0-inch high, 3.5-inch form factor SATA disk drives.
Each disk drive is retained in a custom retention device which affords the drive with
maximum physical protection and minimizes rotational vibration.

Disk Drive Status Indicator

Four status LEDs on the Front Panel (one for each SATA disk drive) provide a visual
indication of hard drive functionality. See
location of the disk drive status LEDs. See
description of disk drive status LED states.
Intel® Entry Storage System SS4200-E User Guide
Storage System Features
"Front Panel Components" on page 6
"Front Panel LED States" on page 12
for the
for a
7