Getting Started; Planning Your Installation; Disk Drive Numbering Convention; Table 2. Configuration Requirements - Intel SS4200-E - Entry Storage System NAS Server User Manual

2

Getting Started

In this chapter, you are shown how to setup your Intel
Caution: When connecting up the Intel
supplied or a power cord which matches the specific voltage and frequency of your
country.

Planning Your Installation

Important: Installation procedures should be performed by service personnel only.
Before beginning installation of your Intel
yourself with the configuration requirements listed in the following table.

Table 2. Configuration Requirements

Component
Drive Retention
Assembly

Disk Drive Numbering Convention

The disk drive numbering convention in the drive retention assembly is as follows:
Intel® Entry Storage System SS4200-E User Guide
®
Entry Storage System SS4200-E, use only the power cord
Number of minimum required disk drives is dependent on type of operating
system and storage management software installed. See your software
documentation for disk drive requirements.

Figure 8. Disk Drive Numbering Convention

®
Entry Storage System SS4200-E.
®
Entry Storage System SS4200-E, familiarize
Location
9