Converting Feet From Vertical To Horizontal Configuration; Removing Or Installing The Enclosure Cover; Figure 15. Converting Feet From Vertical To Horizontal Configuration - Intel SS4200-E - Entry Storage System NAS Server User Manual

Converting Feet from Vertical to Horizontal Configuration

1. Remove feet from vertical position slots in chassis (see letter "A" in the following
figure) and insert into horizontal position slots (see letter "B").

Figure 15. Converting Feet from Vertical to Horizontal Configuration

Removing or Installing the Enclosure Cover

Warning: The enclosure cover must only be removed by a qualified service person as it provides
access to a service area. Potential hazards include:
— Energy hazard
— Rotating fans
— Hot surfaces
— Access to power supply unit openings
Upon replacement, the cover MUST be secured by tightening the captive screws at the
rear of the system. If needed, a Phillips* screwdriver can be used to tighten the screws.
Intel® Entry Storage System SS4200-E User Guide
Hardware Installations and Upgrades
19