Hardware Installations and Upgrades
9. Position the new cooling fan in the system (see letter "A" in the following figure).
Slide rubber mounting grommets on back of the cooling fan into corresponding
keyhole slots in the chassis (see letter "B"). Connect the fan cable to the system board
(see letter "C").
Figure 35. Installing New Right Cooling Fan
10. Re-install the fan guard (see letter "A" in the following figure). Secure the fan guard
to the rear of the chassis with the two screws previously removed (see letter "B").
Figure 36. Re-installing Right Fan Guard
Intel® Entry Storage System SS4200-E User Guide
35
Need help?
Do you have a question about the SS4200-E - Entry Storage System NAS Server and is the answer not in the manual?