Figure 21. Installing Hard Drive Into Drive Tray; Figure 22. Connect Sata And Power Cables - Intel SS4200-E - Entry Storage System NAS Server User Manual

Hardware Installations and Upgrades
8. Install hard drive into drive retention device.
9. Connect the SATA cable from the system board (see letter "A" in the following
figure). Connect the power cable from the power supply (see letter "B").
Note: You may connect the cables prior to placing the hard drive in the lower drive
24

Figure 21. Installing Hard Drive into Drive Tray

retention tray OR you may first secure the hard drive in the lower drive
retention tray, flip the drive assembly over, and then connect the cables.

Figure 22. Connect SATA and Power Cables

Intel® Entry Storage System SS4200-E User Guide