Enclosure Installation Prerequisites; Preparation Of Site And Host Server; Planning And Configuring Your Installation; Power Cord Connection - Intel SS4200-E - Entry Storage System NAS Server User Manual

Getting Started

Enclosure Installation Prerequisites

Caution: Ensure that you have fitted and checked a suitable anti-static wrist band or ankle strap
and observe all conventional ESD precautions when handling system components. Avoid
contact with the system board and other internal components.

Preparation of Site and Host Server

Before beginning, make sure that the site where you intend to set up and use your Intel
Entry Storage System SS4200-E has standard AC power available from an independent
source or a power distribution unit with a UPS (universal power supply).
Adequate airflow around all grill surfaces of the storage system must be provided to
ensure proper cooling of the system.

Planning and Configuring Your Installation

Refer to
configuration requirements.
Refer to the Quick Start User's Guide that shipped with your system for instructions on
initially setting up the Intel
For third-party software solutions, refer to the documentation provided by your vendor for
installing operating systems or additional hardware.

Power Cord Connection

Caution: The power connection must always be disconnected prior to removing the power supply
from the enclosure.
See "Connecting the Power Cord" on page 31
system to a power source.

Grounding Checks

The Intel
has a safety electrical earth connection.
Before powering on, the earth connection to the system should be checked by a qualified
technician.
10
"Planning Your Installation" on page 9
®
Entry Storage System SS4200-E.
®
Entry Storage System SS4200-E must only be connected to a power source that
for information on overall system
for instructions on connecting your storage
Intel® Entry Storage System SS4200-E User Guide
®