Feature History For Per-Session Shaping Using Radius; Radius Attributes - Cisco 10000 Series Configuration Manual

RADIUS-Based Shaping and Policing
RADIUS-based shaping and policing enables the router, acting as the Intelligent Service Gateway (ISG),
to make automatic changes to the shaping and policing rate of specific sessions and services.

Feature History for Per-Session Shaping Using RADIUS

Cisco IOS Release
12.2(31)ZV1
12.2(31)ZV1 and
12.2(31)ZV2
12.2(34)SB
This chapter describes the RADIUS-based shaping and policing features supported on the Cisco 10000
series router and contains the following topics:
•
•
•
•
•

RADIUS Attributes

RADIUS communicates with the ISG by embedding specific attributes in Access-Accept and change of
authentication (CoA) messages. RADIUS-based shaping and policing employs this exchange of
attributes to activate and deactivate services, and to modify the active QoS policy applied to a session.
The following sections describe the RADIUS attributes used in RADIUS-based shaping and policing:
•
•
OL-14660-03
Description
This feature was introduced on the Cisco 10000 series
router for the PRE3.
This feature was integrated with the ANCP feature
information.
This feature was integrated into Cisco IOS Release
12.2(34)SB.
RADIUS Attributes, page 6-1
Per-Session Shaping Using RADIUS, page 6-5
Per-Service Shaping and Policing Using RADIUS, page 6-10
Configuration Examples of RADIUS-Based Shaping and Policing, page 6-15
Verifying RADIUS-Based Shaping and Policing, page 6-20
RADIUS Attributes 250 and 252, page 6-2
Cisco VSA 1, page 6-2
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
6
C H A P T E R
PRE Required
PRE3
NA
NA
6-1