Ui Configuration Menu - Cisco 7941G Administration Manual

UI Configuration Menu

Table 13: NTP Configuration Menu Options
Option
NTP IP Address 1
NTP IP Address 2
NTP Mode 1
NTP Mode 2
UI Configuration Menu
The UI Configuration menu displays the status of various user interface features on the phone. The following
table describes the fields in this menu.
Table 14: UI Configuration Menu Options
Option
Auto Line Select
BLF for Call Lists
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
34
Description
IP address of the primary NTP
server.
IP address of the secondary or
backup NTP server.
Primary server mode. Supported
modes are Directed Broadcast,
Unicast, Multicast, Any cast.
Secondary server mode. Supported
modes are Directed Broadcast,
Unicast, Multicast, Any cast.
Description
Indicates if the phone shifts the call focus
to incoming calls on all lines.
When this option is disabled, the phone only
shifts the call focus to incoming calls on the
line that is in use. When this option is
enabled, the phone shifts the call focus to
the line with the most recent incoming call.
Default: Disabled
Indicates if the Busy Lamp Field (BLF) is
enabled for call lists.
Cisco Unified IP Phone Settings
To Change
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
To Change
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose System >
Enterprise Parameters.