Ui Configuration Menu - Cisco 7931G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

UI Configuration Menu

The UI Configuration menu displays the status of various user interface features on the phone.
Table 4-14
Table 4-14 UI Configuration Menu Options
Option Description
Auto Line Select Indicates if the phone shifts the call focus to incoming calls on
all lines.
When this option is disabled, the focus remains on the line
that is currently in use. When this option is enabled, the phone
shifts the call focus to the line with the most recent
incoming call.
Default: Disabled
BLF for Call Indicates if the Busy Lamp Field (BLF) is enabled for call lists. From Cisco Unified Communications
Lists
Reverting Focus Indicates if the phone shifts the call focus on the phone screen
Priority to an incoming call or a reverting hold call. Settings include:
Lower—Focus priority given to incoming calls.
Higher—Focus priority given to reverting calls.
Even—Focus priority given to the first call.
Auto Call Select Indicates if the phone automatically shifts the call focus to
an incoming call on the same line when the user is already on
a call.
When this option is enabled, the phone shifts the call focus to
the most recent incoming call.
When this option is disabled, all automatic focus changes,
including Auto Line Select, are disabled regardless of
their setting.
Default: Enabled
"more" Softkey Indicates the number of seconds that additional softkeys are
Timer displayed after the user presses more. If this timer expires
before the user presses another softkey, the display reverts to
the initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
describes the options on this menu.
Device Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Manager Administration, choose System
> Enterprise Parameters.
From Cisco Unified Communications
Manager Administration, choose System
> Device Pool.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
4-25