Adding Users To Cisco Unified Communications Manager; Managing The User Options Web Pages; Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages - Cisco 7962G Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users

Adding Users to Cisco Unified Communications Manager

Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
•
•
•
•
You can add users to Cisco Unified Communications Manager using either of these methods:
•
•

Managing the User Options Web Pages

From the User Options web page, users can customize and control several phone features and settings.
For detailed information about the User Options web pages, refer to Cisco Unified IP Phone 7962G and
7942G Phone Guide.

Giving Users Access to the User Options Web Pages

Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group: choose User Management > User Groups.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
"End User Configuration" section.

Specifying Options that Appear on the User Options Web Pages

Most options on the User Options web pages appear by default. However, two options that do not appear
by default are:
•
•
You can control the options that appear on the User Options web pages by using enterprise parameter
settings in Cisco Unified Communications Manager Administration.
The settings apply to all User Options web pages at your site.
Note
OL-12641-01
Access the corporate directory and other customized directories from a Cisco Unified IP Phone.
Create a personal directory.
Set up speed dial and call forwarding numbers.
Subscribe to services that are accessible from a Cisco Unified IP Phone.
To add users individually, choose User Management > End User from
Cisco Unified Communications Manager Administration.
Refer to the Cisco Unified Communications Manager Administration Guide for more information
about adding users. Refer to the Cisco Unified Communications Manager System Guide for details
about user information.
To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
Refer to Cisco Unified Communications Manager Bulk Administration Guide for details.
Show Ring Settings
Show Line Text Label Settings

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0

Adding Users to Cisco Unified Communications Manager
5-19