Device Configuration Menu - Cisco 7906G Administration Manual

Unified ip phone cisco unified callmanager 5.1 (sip)
Hide thumbs Also See for 7906G:
Table of Contents

Advertisement

Network Configuration Menu
Table 4-2
Network Configuration Menu Options (continued)
Option
Description
PC Port
Speed and duplex of the access
Configuration
port (labeled 10/100 PC). Valid
values:
(applies to 7911G
only)
If the phone is connected to a
switch, configure the port on the
switch to the same speed/duplex as
the phone, or configure both to
auto-negotiate.
If you change the setting of this
option, you must change the SW
Port Configuration option to the
same setting.
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
4-14
Auto Negotiate
10 Half—10-BaseT/half
duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half
duplex
100 Full—100-BaseT/full
duplex
Related Topics
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-4
Editing the Values of an Option Setting, page 4-5
Overview of Options Configurable from a Phone, page 4-5
Device Configuration Menu, page 4-15
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration options.
1.
Scroll to the PC Port Configuration
2.
option and then press the Edit softkey.
Scroll to the setting that you want and
3.
then press the Select softkey.
Press the Save softkey.
4.
OL-11515-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7911g

Table of Contents