Configuring Ring Tones - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Ring Tones

STEP 5
Configuring Ring Tones
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click Submit All Changes.
You can define up to ten ring tones for a Cisco SPA300 Series or Cisco SPA500
Series IP Phone.
WIP310 ring tones are not configurable from the configuration utility.
You can define:
• The default ring tone for the extension
• Specific ring tones assigned to individual callers in the personal directory.
These override the default ring tone.
To configure ring tones:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab and proceed to the Ring Tone section.
You can configure the characteristics of each ring tone using a Ring Tone script. In
a Ring Tone script, you can assign a name for the ring tone, and specify:
• Name (n)—Ring tone name, such as Classic, Simple, and Office
• Waveform (w)—1, 2, 3, or 4
• Cadence (c)—1, 2, 3, 4, or 5
You can also download one of two available ring tones (user ring tone 1 or 2) using
TFTP:
http://phone_ip_addr/ringtone1?[url]
• Where the URL syntax is tftp:
• The default host is the TFTP host.
• Port is optional. The default port is 69.
• The link is case sensitive.
//host[:port]/path
.
3
70