Configuring Ring Tones - Cisco SPA 525G2 Administration Manual

Hide thumbs Also See for SPA 525G2:
Table of Contents

Advertisement

Customizing Cisco SPA and Wireless IP Phones

Configuring Ring Tones

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Configuring Ring Tones
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Ext <number> tab.
Under Call Feature Settings, in the Message Waiting field, choose yes.
Click Submit All Changes.
You can define up to ten ring tones for a Cisco SPA 300 Series or Cisco SPA 500
Series IP Phone.
WIP310 ring tones are not configurable from the configuration utility.
You can define:
The default ring tone for the extension
Specific ring tones assigned to individual callers in the personal directory.
These override the default ring tone.
To configure ring tones:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab and proceed to the Ring Tone section.
You can configure the characteristics of each ring tone using a Ring Tone script. In
a Ring Tone script, you can assign a name for the ring tone, and specify:
Name (n)—Ring tone name, such as Classic, Simple, and Office
Waveform (w)—1, 2, 3, or 4
Cadence (c)—1, 2, 3, 4, or 5
You can also download one of two available ring tones (user ring tone 1 or 2) using
TFTP:
http://phone_ip_addr/ringtone1?[url]
3
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents