Set Up Client Matter Codes; Enable Line Status For Call Lists - Cisco 7821 Administration Manual

Set Up Client Matter Codes

Field
Dialed Number
Step 4
Select Save.
Set Up Client Matter Codes
You can force users to enter a Client Matter Code (CMC) when placing a call. For more information, see the
"Client Matter Codes and Forced Authorization Codes" chapter of the Cisco Unified Communications Manager
Features and Services Guide.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Route Pattern Setting > Client Matter
Codes.
Step 2 Configure the Require Client Matter Code field.
This check box controls whether the system prompts the user for a CMC upon placing a call.
Step 3 Select Save.

Enable Line Status for Call Lists

Procedure
Step 1 In the Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2 From the Line Status for Call Lists drop-down list box, choose the applicable profile.
The Disabled option is selected by default.
Parameters that you set in the Product Specific Configuration area may also appear in the Device Configuration
window for various devices and in the Enterprise Phone Configuration window. If you set these same parameters
in these other windows as well, the setting that takes precedence is determined in the following order:
1 Device Configuration window settings
2 Common Phone Profile window settings
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
124
Description
When this check box is checked, the information about the original recipient
of the call displays in the notification window.
Example: If Caller A calls B, but B has forwarded all calls to C and C has
forwarded all calls to D, then the notification box that D sees contains the
phone information for caller B.
By default, this check box is checked.