Symbol Set; Font Size; Font Pitch; Form Lines - Xerox DocuPrint 305 User Manual

Orientation
The paper printing direction can be selected from [Portrait] and [Landscape]. The default is
[Portrait].
2 Sided Print
Specifies whether to perform 2 sided printing. The default is [Off].
When you select [On], you can select [Long Edge Flip] or [Short Edge Flip] as the binding
direction.
Note
• You can set this item only when the duplex unit (optional) is installed.
Font
Specifies the font used. The default is [Courier].

Symbol Set

Specifies the font for symbols. The default is [ROMAN-8].

Font Size

Specifies the font size. The default is [12.00]. You can specify a value between 4.00 and
50.00 in increments of 0.25.

Font Pitch

Specifies the character spacing. The default is [10.00]. You can specify a value between
6.00 and 24.00 in increments of 0.01.

Form Lines

Specifies the form line (the number of lines per form). The default is [64]. You can specify
a value between 5 and 128 in increments of 1.
Quantity
Specifies the copies to be printed between 1 to 999. The default is [1 Sets].
ImageEnhance
Selects whether to perform image enhancement.
Image enhancement is a feature that makes the boundary line between black and white
smoother to decrease jags and enhance the visual appearance. The default is [On].
HexDump
Specifies whether to print the data sent from a computer in the ASCII code corresponding
to the hexadecimal notation format in order to check the data contents. The default is
[Disable].

Draft Mode

Specifies whether to print in draft mode. The default is [Disable].

Line Termination

Sets the line termination. The default is [Off].
75
4.2 Description of Menu Items