Print Features In The Esc/P Mode; Multiple Up (Esc/P); Form Overlay; Barcode (Esc/P) - Xerox DocuPrint C3055 DX Settings Manual

1.4

Print Features in the ESC/P Mode

The following print features can be used in the ESC/P emulation mode.

Multiple Up (ESC/P)

Multiple Up is a feature that prints multiple pages onto one sheet of paper.
In the ESC/P emulation mode, you can perform 2-up printing.

Form Overlay

Form Overlay is a feature that allows you to store forms in the printer and merge them with
print data when printing. When using this feature, select a form you want to use on the
control panel.

Barcode (ESC/P)

The ESC/P emulation mode allows you to use barcodes. The following barcode standards
are supported:
• JAN code
• CODE39
• NW7 (CODABAR)
• Industrial 2 of 5
• ITF (Interleaved 2 of 5)
• CODE128
• Customer barcode

About Forms

The following number of forms can be registered in the ESC/P emulation mode.
Hard disk installed
Hard disk not installed
Note
• If you attempt to register a form when the printer already has the maximum number of forms, or when
the memory is not sufficient to store the form, the printer does not register the form without showing any
error.
Whether forms have been registered successfully can be checked by printing out the [User Defined List].
For information about the [User Defined List], refer to "2.3 ESC/P Mode Reports/Lists" (P. 22).
ESC/P
64
64
1.4 Print Features in the ESC/P Mode
11