Output Iresult - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying print format parameters
Default
Syntax
Options
Table 4-61. OUTPUT IRESULT parameter options and definitions
Option
BLACK
COLOR
Default

OUTPUT IRESULT

parameter: points
to note
4-62
Table 4-60. OUTPUT INVERT parameter options and
Option
BOTH
NONE
NONE
OUTPUT IRESULT
Specifies what the result will be when objects that are imaged
with different inks overlap.
OUTPUT IRESULT = {BLACK | COLOR}
Definition
Specifies that, when two objects that are imaged with different inks overlap,
and black and colored pixels coincide, the resulting pixel is black.
Specifies that, when two objects that are imaged with different inks overlap,
and black and colored pixels coincide, the resulting pixel is colored.
The ink priority that was chosen at installation.
• For monochrome printers such as the DP EPS, the COLOR
and BLACK parameters produce identical results (black).
• The FreeFlow Print Server-based DT 128/155/180 HLC
Printing Systems have queue settings for this option. The
default setting is black.
• The color that results from overlapping objects may be only
black or a color for an entire page. For example, a page
cannot have red text printed over a black background and
also black text printed over a red background.
• The IRESULT can be specified on a page basis with the
IRESULT DJDE. If more than one IRESULT is specified on a
page, the last instance takes precedence.
definitions (Continued)
Definition
Specifies page inversion on front and back sides.
Turns page inversion off.
Using LCDS Print Description Language