Renfert EASY view+ Translation Of The Original Instructions For Use page 44

5.9 HDMI Video Capture Card
Using the HDMI Video Capture Card, it is possible to take photos and also to shoot videos using
en
EASY view+ 3D.
In this case, the HDMI Video Capture Card is used to output the video signal from the head unit to a PC
via a USB port� In the camera application on your PC, the image from EASY view+ 3D is treated like an
image from a webcam�
Depending on the options provided by the program used for video conferencing, the image from
EASY view+ 3D can also be shared during a video conference�
To connect the HDMI Video Capture Card, use the HDMI-HDMI cable provided�
If required, the HDMI-HDMI cable can also be run through the cable duct� For details, see Chap� 8�3 as
well as the illustrated instructions at the end of this manual�
⇒ Switch off the head unit using the on/off switch (7, Fig. 1).
⇒ Insert the HDMI-HDMI cable on the head unit (21, Fig� 2) and on the HDMI Video Capture Card�
⇒ Insert the HDMI Video Capture Card into the PC either directly or via a USB cable�
⇒ Switch on the head unit using the on/off switch (7, Fig. 1).
⇒ Configure the required settings in the camera application on the PC (e.g., select the capture card as the
camera)�
♦ The EASY view+ 3D image appears in the camera application on the computer�
A 3D depiction is not possible using the Video Capture Card.
6 Monitor
The following explanations in Chapter 6 apply only to the monitor that is included in the scope of
delivery for item no. 2400 3000.
If you use a different monitor, follow its safety instructions and instructions for use.
Renfert recommends not changing the factory settings of the monitor as the basic settings for the
EASY view+ 3D�
6.1 Safety instructions
Commissioning
► Do not close off the ventilation openings.
► Place the monitor in a well-ventilated place to avoid overheating.
► Only use accessories specified by the manufacturer or included with the monitor.
► Select a location where the monitor will not be exposed to extreme temperatures, high humidity,
direct sunlight or dusty environments. Avoid proximity to equipment that generates strong mag-
netic fields.
Water and moisture
► Do not operate the monitor near water. To reduce the risk of fire and electric shock, do not expose
the monitor to rain or moisture.
Power cord and power cord connection
► Install the power cord so that it will not be walked on or damaged. Take into account the location
of the cables, plugs, sockets and connector on the monitor.
Product care
► Do not touch the screen directly with your fingers. Grease from the skin can also leave finger-
prints on the screen, which are difficult to remove and can damage the screen. Do not put any
pressure on the screen.
Cleaning
► Clean only with a dry cloth.
Repair
► Do not repair the monitor yourself. High voltages exposed when the cover is opened or removed.
There is a danger of electrical shock. Repairs must be carried out by qualified personnel only.
Lightning strike
► For extra safety during a thunderstorm, or when the monitor is left unattended or unused for a
long time, unplug the power cord of the power supply and the monitor cable. This prevents dam-
age to the monitor due to lightning strikes and power surges.
- 16 -