Integrated Peripherals Parameters - NEC POWERMATE VE ETC Manual

NOTE
select parameters from the Integrated Peripherals
menu.
Use the legend keys to make your selections and exit to the
Main Menu. Use the table that follows to configure your
peripherals.

Integrated Peripherals Parameters

FEATURE OPTIONS
COM A Port Disabled
COM B Port User-selectable settings
Auto
LPT Port Disabled
378, IRQ 7 (default)
User-selectable settings
Auto
Remove
LPT Mode Output only (default)
Remove
ECP Channel DMA 0
DMA 1
DMA 3
4-16 Setting System Parameters
A Supervisor password might be required to
DESCRIPTION
Selects a unique address and
interrupt request for the listed COM
ports. Auto selects the next available
combination.
Factory settings:
COM A default: 3F8, IRQ4
COM B default: 2F8, IRQ3
Selects a unique address and
interrupt request for the LPT port.
Auto selects the next available
combination.
Enables parallel port to function
normally (Output only),
bidirectionally, or in an enhanced
capabilities port (ECP) mode. Check
your printer documentation to set the
correct LPT mode for your printer.
Available when ECP is selected for
the LPT mode.