Parity; Integrated Peripherals Parameters - NEC POWERMATE 4100M Service Manual

Use the legend keys to make the selections and exit to the Main Menu. Use the following
table to configure the peripherals:
Table Section 2-8 Integrated Peripherals Parameters
Feature
COM1 port
COM2 port
LPT port
Diskette
Controller
IDE Controller
VESA IDE
controller

Parity

The Parity option in the Advanced menu controls system memory parity checking. The de-
fault setting for the U.S. and Canada is "Disabled." This parameter might require a Supervi-
sor password.
NOTE: A Supervisor password might be re-
quired to select parameters from the Integrated
Peripherals menu.
Options
Disabled
User-selectable
settings
Auto
Disabled
378, IRQ 7 (default)
User-selectable
settings
Auto
Enabled (default)
Disabled
Enabled (default)
Disabled
Enabled (default)
Disabled
NOTE: Due to system specifications required
by international markets, only international sys-
tems support memory parity. Systems sold in the
U.S. and Canada do not support memory parity.
Setup and Operation
Description
Selects a unique address and interrupt request
for the listed COM ports. Auto selects the next
available combination.
COM1 default: 3F8, IRQ4
COM2 default: 2F8, IRQ3
COM port settings must match system board
JP9A and JP9B jumper setting, later in this
section.
Selects a unique address and interrupt request
for the LPT port. Auto selects the next available
combination.
The LPT port setting must match the system
board JP9C jumper setting, later in this section.
Enables the on-board diskette drive controller.
Enables the on-board standard IDE controller
(secondary channel).
Enables the on-board fast IDE controller (primary
channel).
2-17