Integrated Peripherals Parameters - NEC PowerMate V486 Series Manual

Integrated Peripherals Parameters

FEATURE OPTIONS
COM1 Port Disabled
COM2 Port User-selectable
settings
Auto
LPT Port Disabled
378, IRQ 5 (default)
User-selectable
settings
Auto
LPT Mode Output only (default)
Bi-directional
ECP
Diskette Enabled (default)
Controller Disabled
Local Bus IDE Both (default)
Adapter Primary
Disabled
DESCRIPTION
Selects a unique address and
interrupt request for the listed
COM ports. Auto selects the
next available combination.
Factory settings:
COM1 default: 3F8, IRQ4
COM2 default: 2F8, IRQ3
The fax/modem board uses the
COM3 port (IRQ2) setting.
Selects a unique address and
interrupt request for the LPT port.
Auto selects the next available
combination.
Enables parallel port to function
normally (Output only),
bidirectionally, or in an enhanced
capabilities port (ECP) mode.
Check your printer documentation
to set the correct LPT mode for
your printer.
Enables the on-board diskette
drive controller.
Enables the on-board IDE
controllers.
The Both option enables the
primary (fast) channel and
secondary (standard) channel.
The Primary option enables only
the primary (fast) channel.
Setting System Parameters 2-15