Parity; Integrated Peripherals Parameters - NEC POWERMATE VP Manual

FEATURE
COM1 Port
COM2 Port
LPT Port
Diskette
Controller
Local Bus IDE
Adapter

Parity

2-16 Setting System Parameters

Integrated Peripherals Parameters

OPTIONS
Disabled
User-selectable
settings
Auto
COM1 default: 3F8, IRQ4
COM2 default: 2F8, IRQ3
Disabled
378, IRQ 5 (default)
User-selectable
settings
Auto
Enabled (default)
Disabled
Both (default)
Disabled
Primary
The Parity option in the Advanced menu controls system
memory parity checking. The system ships with non-parity
SIMMs. The default setting for the Parity option is "Dis-
abled."
The system supports parity and non-parity
memory. Parity should only be "Enabled" if the non-
parity SIMMs that come with your system are re-
moved and replaced with parity SIMMs.
The Parity parameter might require a Supervisor password.
DESCRIPTION
Selects a unique address and
interrupt request for the listed
COM ports. Auto selects the
next available combination.
Selects a unique address and
interrupt request for the LPT port.
Auto selects the next available
combination.
Enables the on-board diskette
drive controller.
Enables the on-board IDE
controllers. "Both" enables the
primary (fast) channel and
secondary (standard) channel.