Integrated Peripherals Parameters - NEC POWERMATE V Manual

NOTE
select parameters from the Integrated Peripherals
menu.
Use the legend keys to make your selections and exit to
the Main Menu. Use the table that follows to configure
your peripherals.

Integrated Peripherals Parameters

FEATURE OPTIONS
COM A Port Disabled
COM B Port User-selectable
settings
Auto
COM B Mode Serial Port
IrDA (default)
LPT Port Disabled
378, IRQ 7 (default)
User-selectable
settings
Auto
LPT Mode Output only (default) Enables parallel port to function
ECP
ECP Channel DMA 0
DMA 1
DMA 3
4-16 Setting System Parameters
A Supervisor password might be required to
DESCRIPTION
Selects a unique address and interrupt
request for the listed COM ports. Auto
selects the next available combination.
Factory settings:
COM A default: 3F8, IRQ4
COM B default: 2F8, IRQ3
Serial Port enables COM B port as a
serial port. IrDA enables COM B port
for IrDA transfers and IR remote control
signals.
Selects a unique address and interrupt
request for the LPT port. Auto selects
the next available combination.
normally (Output only), bidirectionally,
or in an enhanced capabilities port
(ECP) mode. Check your printer
documentation to set the correct LPT
mode for your printer.
Available when ECP is selected for the
LPT mode.