Host Configuration Protocol; Overview Of Dhcp; What Is Dhcp - SMC Networks WUSB32 - annexe 2 Manual

C
H
You can configure your network and ADSL Barricade to use
the Dynamic Host Configuration Protocol (DHCP). This section
provides an overview of DHCP and instructions for implementing
it on your network.

Overview of DHCP

What is DHCP?

DHCP is a protocol that enables network administrators
to centrally manage the assignment and distribution of
IP information to computers on a network.
When you enable DHCP on a network, you allow a device –
such as the ADSL Barricade or a router located with your ISP –
to assign temporary IP addresses to your computers whenever
they connect to your network. The assigning device is called a
DHCP server, and the receiving device is a DHCP client.
Note:
ONFIGURING
OST
If you used the Quick Start instructions, you
configured each LAN PC with an IP address,
or you specified that it will receive IP information
dynamically (automatically). If you chose to have
the information assigned dynamically, then you
configured your PCs as DHCP clients that will
accept IP addresses assigned from a DCHP
server such as the ADSL Barricade.
C
ONFIGURATION
P
D
YNAMIC
ROTOCOL
43