Default Switch Configuration
If you experience problems in configuring the switch, you can
return it to its default configuration by downloading default setting
files. These files are provided on diskette 2/2 of the Setup Utility.
The file that is used depends on the module installed, as shown in
the table below.
Filename
24P.BIN
32P.BIN
24PGFS2.BIN
To download the file:
1. Insert the diskette into the floppy drive of your computer.
2. Click on "Open" in main window of the utility program to
browse for the file.
3. Click on "Open."
The file will now download.
C
ONFIGURING THE
Module Installed
None
8-Port 10BASE-T/100BASE-TX
2-Port 1000BASE-SX
S
F
WITCH
ROM THE
C
P
ONSOLE
ORT
25