Sfcc & Pwrup - Printronix P7010 User Manual

IGP/VGL (with LG) Graphics Options
Graphics
Options
(from page 194)
Slash 0
Ignore Dots
Disable*
Disable*
Enable Enable
UPC Rot. Char
Descenders Size
Enable* Adjusted*
Disable Not Adjusted
Absorb After IGP110
^PN Compatbl.
Disable* Disable*
Enable
Enable
SFCC & Pwrup
This option has several sub-options which define the SFCC and power-up
configuration used with VGL.
VGL SFCC
This option selects the Special Function Control Code. The default value 5E.
Run a configuration printout to determine the currently selected VGL SFCC.
Power Up ^X
•
Disable (default).
•
Enable. Selects the ignore mode as the power-up default and selects the
graphics mode ^PY as the power-up default. All characters are ignored
until a ^A command is received.
Power Up ^F
•
Disable (default).
•
Enable. Selects free format mode as the power-up default and selects the
graphics mode ^PY as the power-up default. Free format causes the VGL
to ignore carriage returns, line feeds, and all characters below hex 20
sent from the host.
Append Truncate
Rotated Alpha
Disable* Enable*
Enable Disable
Ignore Midline PY
Spaces
Disable* Disable*
Enable Enable
IGP/VGL Submenu (with LG)
* = Factory Default
True Vert Absorb After
1/10 ^PY
Disable* Absorb Motion*
Enable Absorb All
Disable
Dark Width Limit
Barcode
Disable* Disable*
Enable Enable
195