Configuring The Emulation With The Control Panel - Printronix P7010 User Manual

Chapter 4
IGP/PGL Emulation
Extended Character Sets provide 33 extended character sets, also
containing 96 characters in length. These are also stored in memory.

Configuring The Emulation With The Control Panel

You can select PGL default parameters directly from the control panel or by
control codes as explained in the IGP/PGL Programmer's Reference Manual.
The PGL parameters are described on the following pages. Parameters
marked with an asterisk (*) indicate the default value. The printer must be
offline to enter the configuration structure.
Pressing an invalid key to enter a parameter value may move you to another
level in the configuration or exit the configuration menu completely. Configure
the IGP/PGL according to your specific requirements.
IMPORTANT
BEFORE you reconfigure the IGP/PGL, print a configuration sheet to see
all of the current settings.
176