Form Width - Printronix P7010 User Manual

Form Length
Form length is the number of lines that can be printed on a page. You can set
the form length in inches, millimeters (mm), or as a function of the current lpi
(lines per inch).

Form Width

The form width can be specified in inches, millimeters, or as a function of the
current cpi (characters per inch). The forms width set should not exceed the
actual paper width.
Vert Forms
•
Bot Frm 66/6 (default). This option sets the bottom margin for the forms.
You must specify the bottom margin in lines (at 6 lines per inch), ranging
from 0 to 198 lines (33 inches). The default setting is 66. Press the right
arrow to increase the value, left arrow to decrease the value, and ENTER
to change units. Selecting a value for this option resets the top margin to
0, so the top margin must be redefined after this option is selected.
•
Top Mrg 6/0 This option sets the top margin for the forms. You must
specify the top margin in lines (at 6 lines per inch), ranging from 0 to 198
lines (33 inches). The default setting is 0. Press the right arrow to
increase the value, left arrow to decrease the value, and ENTER to
change units. The margins will automatically adjust so that the top and
bottom margins do not cross each other.
Horiz Forms
•
Left Mgr 0.00 (default). This sets the left margin for the forms. You must
specify the left margin in 1/10 inch increments, from 0 to 13.1 inches. The
default value is 0. Press the right arrow to increase the value, left arrow to
decrease the value, and ENTER to change units. The margins will
automatically adjust so that the left and right margins do not cross each
other.
•
Right Mrg 13.2. This sets the right margin for the forms. You must specify
the right margin in 1/10 inch increments, from 0.1 to 13.2 inches. The
default value is 13.2. Press NEXT to increase the value, PREV to
decrease the value, and ENTER to change units. The margins will
automatically adjust so that the left and right margins do not cross each
other.
Page Length Rep
•
Inches/Page (default). Allows the user to set the page length in inches.
•
Lines/Page. Allows the user to set the page length in number of lines.
Max Line Width
Set the maximum line width at either 13.2 inches or the maximum width of the
printer.
67