Printronix P7010 User Manual page 215

Font
Select a default font style and character set for the LG emulation, as follows:
•
Style. This option allows you to specify a print quality that includes a
characters per inch (cpi) and lines per inch (lpi) setting, in the format Type
cpi lpi. The default setting is DP 10 6 (Data Processing, 10 cpi, 6 lpi). The
print quality types you may choose from are as follows:
DP = Data Processing (standard quality)
CORESPON = Correspondence (near letter quality)
COMPRESS = Compressed (vertically compressed for printing
long graphs and charts)
OCR A & OCR B = Optical Character Recognition, sets A
and B
HS = High Speed (Draft quality for high speed printing)
•
Character Set. This option allows you to select a character set. The
character set you select can be any of the Digital Multinational sets, which
include the U.S. ASCII set and several foreign language and special
character sets.
Vert Forms
•
Bot Frm 66/6 (default). This option sets the bottom margin for the forms.
You must specify the bottom margin in lines (at 6 lines per inch), ranging
from 0 to 198 lines (33 inches). The default setting is 66. Press the right
arrow to increase the value, left arrow to decrease the value, and ENTER
to change units. Selecting a value for this option resets the top margin to
0, so the top margin must be redefined after this option is selected.
•
Top Mrg 6/0.This option sets the top margin for the forms. You must
specify the top margin in lines (at 6 lines per inch), ranging from 0 to 198
lines (33 inches). The default setting is 0. Press the right arrow to
increase the value, left arrow to decrease the value, and ENTER to
change units. The margins will automatically adjust so that the top and
bottom margins do not cross each other.
•
Bot Mrg 66/6. This option sets the bottom margin for the forms. You must
specify the bottom margin in lines (at 6 lines per inch), ranging from 0 to
198 lines (33 inches). The default setting is 66. Press the right arrow to
increase the value, left arrow to decrease the value, and ENTER to
change units. Selecting a value for this option resets the top margin to 0,
so the top margin must be redefined after this option is selected.
215