Printronix P7010 User Manual page 32

Chapter 3
Operational Procedures
Platen Lever
9. Turn the platen stop knob clockwise or counterclockwise to match the
paper thickness. (The A-B-C scale corresponds approximately to 1-, 3-,
and 6-part paper thickness).
NOTE: If you are using the same thickness of paper, there is no need to
10. Lower the platen lever until it stops.
11. Press ON LINE/CLEAR to remove the "LOAD PAPER" fault message
from the display.
12. Press PAPER ADVANCE several times to make sure the paper feeds
properly beyond the tractors and over the lower paper guide. Feed
sufficient paper to ensure the paper stacks correctly.
13. Close the printer top cover. Close the cabinet front door.
14. Press ON LINE/CLEAR to place the printer in online mode and resume
printing.
32
Vertical Position
Knob
A
Platen
Stop
Figure 8. Setting the Platen Lever
readjust.
Paper Thickness
Indicator
A
Platen Stop
Knob