Printronix P7010 User Manual page 297

1. Align the paper supply box with the label on the bottom left side of the
modesty panel. (See Figure 31 on page 296.)
Unlock and open the tractor doors and slide the paper from below,
2.
through the black paper out sensor slot on the left side, and up between
all front and rear paper guides.
3. Load the paper on the left tractor sprockets and close the tractor door.
4. Load the paper onto the right tractor sprockets and close the tractor door.
Figure 32. Adjusting the Horizontal Paper Tension
5. Adjust the paper web tightness by sliding the right tractor to remove slack
or to adjust for various paper widths. (See Figure 32.)
6. Lock the tractors in position by pressing down on the tractor locks.
Figure 33. Paper Exiting the Top of the Printer
Paper
Tractor (2)
Tractor
Lock (2)
Paper
Tear Bar
Load Paper
297