Optimizing Print Quality - Printronix P7010 User Manual

Step Press
22.
23.
ENTER
24.
+
25.
ON LINE/CLEAR
Now you have the saved configuration for later use if needed.

Optimizing Print Quality

LP+, IGP/PGL, and IGP/VGL Emulations
You can optimize print quality for darker and sharper barcodes and
characters. Doing so, however, will decrease the printer speed.
To optimize print quality, you can change the values of the following
configuration parameters:
•
Bar Code Quality (Printer Control menu): Select "Dark" or
"Recommended." Recommended prints the darkest images, but at the
slowest speed. Dark prints at a faster speed than Recommended, but the
characters are not as dark. (See page 219 for a written description of Bar
Code Quality.)
•
Print Quality (IGP/PGL emulation): Select "Best" or "High." Best prints
the darkest images, but at the slowest speed. High prints at a faster
speed than Best, but the characters are not as dark. (See page 177 for
the IGP/PGL Configuration Menu, and see page 186 for a written
description of Print Quality.)
•
Print Quality (IGP/VGL emulation): Select "High." (See page 190 for the
IGP/VGL Configuration Menu, and see page 197 for a written description
of Print Quality.)
LCD
Save Config. TEST now appears as one of configuration
TEST choices.
Saving Configuration
Save Config. Your configuration is saved as TEST.
TEST*
ENTER SWITCH Locks the ENTER key.
LOCKED
ONLINE
Ribbon Life = 100%
Optimizing Print Quality
Notes
57