Buffer Print - Printronix P7010 User Manual

Chapter 4
Coax/Twinax (CTHI) Emulation
Max. Print Width
Set the maximum print width at either 13.2 inches or the maximum width of
the printer. The default is 13.2 inches.

Buffer Print

•
Disable (default). The printer will print normally.
•
Enable. The printer prints the EBCDIC data and control codes received
from the host as hex values. Refer to page 253 for information on how to
obtain a hex code printout.
NOTE: Use of this parameter may alter print attributes set by the host
114
computer. A power cycle may be required after changing Buffer Print
from enable to disable.