Printronix P7010 User Manual page 269

Table 15. LCD Message Troubleshooting Table
Displayed Message
E31F EVENT 5 BP Yes
See User Manual
E31G EVENT 6 BP Yes
See User Manual
E31H EVENT 7 BP Yes
See User Manual
E32A CND 0 BP Yes
See User Manual
Can User
Explanation
Correct?
An illegal or unsupported
instruction was attempted
in the application
program.
An illegal or unsupported
instruction was attempted
in the application
program.
An illegal or unsupported
instruction was attempted
in the application
program.
An illegal or unsupported
instruction was attempted
in the application
program.
Fault Messages
Solution
1. Cycle Power. Run the print
job again. If the message
appears, load the latest
emulation software.
2. Cycle power. Run the print
job again. If the message
appears, record the display
message and send it to your
next higher support facility.
1. Cycle Power. Run the print
job again. If the message
appears, load the latest
emulation software.
2. Cycle power. Run the print
job again. If the message
appears, record the display
message and send it to your
next higher support facility.
1. Cycle Power. Run the print
job again. If the message
appears, load the latest
emulation software.
2. Cycle power. Run the print
job again. If the message
appears, record the display
message and send it to your
next higher support facility.
1. Cycle Power. Run the print
job again. If the message
appears, load the latest
emulation software.
2. Cycle power. Run the print
job again. If the message
appears, record the display
message and send it to your
next higher support facility.
269