Paper Specifications - Printronix P7010 User Manual

P7000 series psa3 printers
Hide thumbs Also See for P7010:
Table of Contents

Advertisement

Appendix A

Paper Specifications

Paper Specifications
Type:
Thickness:
Sheet Thickness:
Drive:
Labels
On Backing:
Sheet Size:
Thickness:
286
Edge-perforated, fan-fold, 3 to 17 inches (7.62 to 43.18 cm)
wide, 2 to 12 inches (5.08 to 30.48 cm) long.
SureStak Power Stacker option works with forms 5 to 12 inches
(12.7 to 30.48 cm) long and up to 16 inches (41 cm) wide with-
out the paper tent or 15.5 inches (39.5 cm) wide with the paper
tent installed.
Single-part: 15 to 100 pound (6.80 to 45.36 kg) stock;
Multi-part: 1- to 6-part forms (maximum 12 lb [5.44 kg] ply of
upper plies)
0.025 inch (0.064 cm) maximum
Adjustable tractors (6-pin engagement)
One-part continuous perforated fanfold back form. Labels must
be placed at least 1/6 inch (0.42 cm) from the fan-fold perfora-
tion. Backing adhesive must not be squeezed out during print-
ing.
3 to 17 inches (7.62 to 43.18 cm) wide, including the two stan-
dard perforated tractor feed strips. A maximum sheet length of
16 inches (40.64 cm) between top and bottom perforations.
NOTE: A 16 inch rear door is needed for the cabinet model.
Power Paper Stacker option is 5 to 12 inches (12.7 to 30.48
cm) long.
Not to exceed 0.025 inch (0.064 cm) (including backing sheet)

Advertisement

Table of Contents
loading

Table of Contents