Set Text Orientn; Image Buf Size; Intervention Req - Printronix P7010 User Manual

Set Text Orientn

Specifies the direction in which characters are printed on the page. This
allows the printer to print languages which are printed right to left instead of
left to right.
•
Control By Host (default). Allows printers configured as a 4234 to use
the "Set Text Orientation" command from the host.
•
Left to Right.
•
Right to Left. When a right to left language is selected, the host will be
notified of print direction changes when the printer is placed online.

Image Buf Size

Allows you to select 2K or 4K as the image buffer size. This option is valid
only when the printer emulates the 3287. For the 4234 emulation, the buffer
size is fixed at 4K. A POR status is sent to the host when the printer is placed
online.

Intervention Req

•
Send to Host (default). The printer sends a signal to the host computer
when a printer fault or hold mode time-out occurs.
•
Do Not Send. No signal will be sent to the host computer.
Compatibility Op
The Compatibility Options allow you to select special printer functions in the
non-SCS mode based on the capabilities of the printer emulated.
CR At MPP+1
MPP is Maximum Print Position, which is also known as line length. This
option controls a carriage return at the end of a print line and at MPP+1.
•
On (default). Produces a carriage return to the first print position of the
next line.
•
Off. Produces a carriage return to the first print position of the current line.
NL At MPP+1
Controls how many lines are skipped when the carriage returns to a new line.
•
On (default). Moves to the first print position two lines down from the
current position.
•
Off. Moves to the first print position of the next print line.
Coax Emulation
111