WLAN LEAP
WLAN
2
LEAP
(from page 87)
Auth Method
LEAP
Username
LEAP Username (01-15)
Open*
Shared
LEAP Username (16-30)
1
LEAP Username (31-32)
Kerberos
2
LEAP
Auth Method
This feature allows the user to select the authentication method used for the
wireless network interface.
•
Open (default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a Symbol RF
card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).
LEAP Username
•
LEAP Username (01-15). The first 15 characters of the LEAP user name
(maximum number of characters is 32).
•
LEAP Username (16-30). Characters 16 to 30 of the LEAP user name
(maximum number of characters is 32).
•
LEAP User (31-32). Characters 31 to 32 of the LEAP user name
(maximum number of characters is 32).
Reset LEAP User
Resets the LEAP user name to an empty string.
LEAP Password
•
LEAP Password (01-15). The first 15 characters of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (16-30). Characters 16 to 30 of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (31-32). Characters 31 to 32 of the LEAP password
(maximum number of characters is 32).
Reset LEAP Password
Resets the LEAP password to an empty string.
* = Factory Default
1
Only if a Symbol radio card is installed.
2
Only if a Cisco radio card is installed.
Reset LEAP
LEAP
User
Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
WLAN LEAP
Reset LEAP
Password
101