World Trade - Printronix P7010 User Manual

Char Set Select
Specifies the print language used by the printer. Character sets are shown in
detail in the Character Sets Reference Manual .
Active Char Set
This option selects which group of character sets (Primary or Secondary) will
be active. Secondary Set is the default.
Prt Partial Line
•
Enable (default). Forces the printer to print a partial line (i.e., line not
ending with a LF) before moving to the top of form on the next page.
•
Disable. The last partial line of data will not be printed.
Device ID
This parameter defines the printer emulation as IPDS, 5225, or 4234-2. After
the emulation has been changed, a POR status is sent to the host. IPDS is
the default.
Device Address
Allows you to set the device address from 0 through 6. The host directs data
and commands on the twinax line to a specific device based on its unique
device address. After the address has been changed, a POR status is sent to
the host.

5225 World Trade

The 5225 emulation has a standard multinational character set that serves as
a base and 14 extended world trade character set assortments.
Cancel IGP/DCU
•
Enable (default). Cancels all buffers when a job is put on hold from the
host or the CANCEL key is pressed.
•
Disable. Does not cancel any internal buffer in the printer when a job is
put on hold from the host or the CANCEL key is pressed.
Twinax Params
117