Chapter
3
Integrated Print Management System
Spool
Right Hub
5. Place the full spool on the right hand side ribbon hub and press it into
place.
IMPORTANT
The full spool has a barcode label on the bottom side and a date code
label on the top. Once the sensor reads and logs the ribbon barcode, the
Integrated Print Management System starts to track ribbon usage. A
date code label is on the top side of the right hand spool.
If you remove the ribbon during the course of its life and want to
re-install the same ribbon, be sure to place the same spools on the
correct hubs.
44
Figure 20. Loading the Barcoded Ribbon
Date Code Label