Transmission Report; Reception Report - Muratec F-68P User Manual

Transmission report

In the default setting, a transmission report is printed out only in
the event of a transmission error. However, you can change this
setting so that a transmission report is printed for every fax
transmitted, only in the event of an error or never.
1
Press MENU and 2, 2, 5: "25 TX REPORT".
2
Press START/COPY and use
"ERROR", "OFF" or "ON".
3
Press START/COPY and then STOP twice.

Reception report

In the default setting, a reception report is printed out only in the
event of a transmission error. However, you can change this set-
ting so that a reception report is printed for every fax received,
only in the event of an error or never.
1
Press MENU, 2, 2, 6: "26 RX REPORT".
2
Press START/COPY and use
"ERROR", "OFF" or "ON".
3
Press START/COPY and then STOP twice.
/ to select
/ to select
4.5