The Right-Key Function On Nlcp - Danfoss VLT FC 280 Operating Manual

Operating Guide | VLT® Midi Drive FC 280
ELECTRICAL HAZARD
Even after pressing the [Off/Reset] key, voltage is present at the terminals of the drive. Pressing the [Off/Reset]
key does not disconnect the drive from mains. Touching live parts can result in death or serious injury.
Do not touch any live parts.
l

The Right-key Function on NLCP

5.4.3
Press [►] to edit any of the 4 digits on the display individually. When pressing [►] once, the cursor moves to the 1st digit and the digit
starts flashing as shown in Figure
the decimal point.
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Figure 24: Right-key Function
[►] can also be used for moving between parameter groups. When in Main Menu, press [►] to move to the 1st parameter in the next
parameter group (for example, move from parameter 0-03 Regional Settings[0] International to parameter 1-00 Configuration Mode[0]
Open loop).
Danfoss A/S © 2024.10
24. Press the [▲] [▼] to change the value. Pressing [►] does not change the value of the digits or move
WARNING
Commissioning
AQ381425076031en-000201 / 130R1223 | 41