Danfoss VLT FC 280 Operating Manual page 43

Operating Guide | VLT® Midi Drive FC 280
6. [►] and [▲] [▼]: Set/change the parameter value.
7.
Press [OK] to accept the value.
8.
To exit, press either [Back] twice (or 3 times for array parameters) to enter Main Menu, or press [Menu] once to enter Status.
Continuous Parameters
5.4.5.2
Setup 1
OK
1
Setup 1
2 x
2
OK
+
Setup 1
OK 3
Setup 1
4
Setup 1
5
Setup 1
6
Setup 1
7
Setup 1
8
Setup 1
Figure 26: Main Menu Interactions - Continuous Parameters
Table 10: Changing Values in Continuous Parameters
1 [OK]: The 1st parameter in the group is shown.
2 Press [▼] repeatedly to move down to the parameter.
3 Press [OK] to start editing.
4 [►]: 1st digit flashing (can be edited).
5 [►]: 2nd digit flashing (can be edited).
6 [►]: 3rd digit flashing (can be edited).
Danfoss A/S © 2024.10
12
11
10
9
OK
Commissioning
AQ381425076031en-000201 / 130R1223 | 43