Laser Scanner Cleaning - Kyocera KM-C2525E Advanced Operation Manual

3 Press [Developer refresh].
4 Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the
25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model.
If the correct code has been entered, the Developer refresh screen will be displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/25 ppm model, 32003200 for the 32/25 and 32/32 ppm models and
40004000 for the 40/35 ppm model.
5 Press [On]. Developer refresh begins. Wait approximately 140 seconds.
NOTE: Waiting time may be longer when the toner is refilled during developer refresh.
6 Press [Close] after developer refresh is complete.
7
Press [Close]. The display is returned to the System Menu screen.

Laser Scanner Cleaning

If white or color streaks appear on images, perform Laser Scanner Cleaning.
1 Press the System Menu/Counter key.
2 Press [User Adjustment].
3 Press [Laser Scan Cleaning].
Press [On]. Laser scanner cleaning begins. Wait approximately 10 seconds.
4
5 Press [Close] after laser scanner cleaning is complete.
6 Press [Close]. The display is returned to the System Menu screen.
m Menu / Counter
nt
Drum Color
refresh Calibrat.
Color
Matching
System Menu / Counter
User adjustment
Auto gray Drum
adjust refresh
Laser Scan Color
Cleaning Matching
System Menu
System Menu
Close
Color Developer
Regist. refresh
Color Color Developer
Calibrat. Regist. refresh
7-37