Table of Contents
Advertisement
Troubleshooting > Adjustment/Maintenance
Calibration
Using this function enables printing in the most appropriate color by adjusting hue and color drift in detail.
1
Display the screen.
[System Menu / Counter] key > [Adjustment/Maintenance] > [Calibration]
2
Perform adjustment.
Select [Start]. Calibration begins.
NOTE
When correct toner overlapping is not ensured even after performing calibration, refer to the following:
Color Registration Procedure 11-25
Perform the laser scanner cleaning.
Remove vertical white lines from the printout.
1
Display the screen.
[System Menu / Counter] key > [Adjustment/Maintenance] > [Laser Scanner Cleaning]
2
Perform adjustment.
Select [Start]. Laser Scanner Cleaning begins.
Tone Curve Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the density of printed images may differ
from the original. If that is the case, use this function to ensure consistency in density between the printed image and the
original. If calibration does not improve the tones, perform this adjustment.
A total of 3 pattern pages (No. 1 to 3) are printed during adjustment in [Copy/Print (600dpi)]. Also, in [Print (1200dpi)], 1
pattern page (No. 1) is printed out. The printed patterns are read sequentially during the adjustment.
11-30
Advertisement
Table of Contents
