Kyocera KM-C2525E Advanced Operation Manual page 199

File Save Folder Settings
About the Setup Dialog Box
To set save folders or to change or set a password, click the Setup button on the start dialog box.
The Setup dialog box appears, where you can confirm previously set folders.
Item
New Button
Edit Button
Delete Button
No.
Folder
Comment
Hard Disk Warning (%)
Reception Notice
Permit File Overwrite
Maximum of Received
File List
OK Button
Description
Click to configure a new save folder.
Click to configure a change the settings of an existing save folder.
Click to configure delete the settings of a save folder.
The folder number of the save folder.
Shows the save folder.
Shows comments for each folder.
Shows a warning message in the start dialog box status field when the
hard disk usage reaches the configured percentage.
The color of the Scanner File Utility shown on the Windows Taskbar
changes to yellow when the hard disk usage reaches the specified
percentage.
Shows a receive notification on the display when a new file has been
saved. The receive notification is checked and when a new image has
been received, a receive notification dialog is shown. Click the Open
button to show the start dialog box.
Configures whether to allow overwriting when a file with the same
name is received in the receive folder. The name will be changed to a
new file when saving if overwriting is not allowed.
Set the maximum number of items to show in the Receive File List.
(10 - 100 items)
After finishing settings or changes for save folders, click this button.
The display returns to the start dialog box.
Included Scanner Utilities
6-7