Kyocera KM-C2525E Advanced Operation Manual page 337

Display
Warning image adapt.
Print overrun Press GO.
Memory overflow Press GO.
Virtual mailbox full.
Interface occupied.
Opt. ROM error Press GO.
Format error Hard Disk.
Check the waste punch box.
(Check Punch Hole box.)
Checkpoints
—
—
—
—
Is the selected interface currently in
use?
—
—
Is the optional 3000 sheet document
finisher waste punch box securely
fastened?
Corrective Actions
Printing not possible at currently set
resolution due to insufficient
memory. Add memory to the printer
or change the print resolution.
Overrun has occurred due to
insufficient memory.
Press the Printer key to switch to
printer mode.
Press [GO] to continue printing.
Press [Cancel] to cancel printing.
If resume time has been configured
for Auto Continue, printing resumes
automatically after the set time has
elapsed. After displaying this
message, Page Protect mode is
automatically set to [On].
The current print job cannot be
processed due to insufficient free
memory.
Press the Printer key to switch to
printer mode.
Press [GO] to continue printing. The
remaining pages will be printed up to
the final processed data.
Press [Cancel] to cancel printing.
If RAM Disk is enabled, decrease
the RAM disk size. Additional printer
memory is recommended if this error
frequently occurs. For additional
printer memory, contact your Service
Representative or Authorized
Service Center. If resume time has
been configured for Auto Continue,
printing resumes automatically after
the set time has elapsed.
Insufficient virtual mailbox space.
Print the data stored in the virtual
mailbox.
Try the operation again later.
An option ROM read error has
occurred. Press the Printer key and
press [GO]. The error is cleared.
Format the Hard Disk.
Refer to the optional 3000 sheet
document finisher Operation Guide
to securely fasten the waste punch
box.
Troubleshooting
Reference
Page
—
—
—
page 3-37
—
—
page 3-33
—
9-13