Paper - Kyocera KM-C2525E Advanced Operation Manual

Appendix

Paper

Basic Paper Specifications
This machine is designed to print on standard printing paper as used in regular ('dry') copiers and
page printers such as laser printers. It also supports a variety of other types of paper that conform to
the specifications given in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or paper
wrinkling.
Use the MP tray for transparencies, labels, envelopes, and similar types of paper.
NOTE: Some recycled paper does not meet requirements for use with this machine as listed in the
Basic Paper Specifications shown below, such as moisture or pulp content requirements. For this
reason, we recommend purchasing a small amount of recycled paper as a sample for testing prior
to use. Choose recycled paper that gives the best printing results and contains low levels of paper
dust.
We are not responsible for any problems arising from the use of paper that does not conform to
these specifications.
Usable Paper Types
Use standard copier paper for regular copiers or laser printers. The print quality will vary depending
on the paper quality. Poor quality paper may cause unsatisfactory printing results.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with this machine. Refer to the
subsequent sections for further details.
Item
Weight
Thickness
Dimensional accuracy
Squareness of corners
Moisture Content
Paper Grain
Pulp content
Appendix-2
Specifications
Cassettes: 60 - 105 g/m 2
MP tray: 60 - 220 g/m 2
0.086 - 0.110 mm
±0.7 mm
90° ±0.2°
4 - 6 %
Long grain (paper supply direction)
80 % or more