Kyocera KM-C2525E Advanced Operation Manual page 175

3 Select Mail Server Authentication.
4 Choose SMTP Authentication, POP
before SMTP or POP before SMTP
(APOP) for Authentication Type.
5 Enter the Login Account Name to use in mail server authentication.
6 To enter a new password or change a password, set Change Password to Yes.
NOTE: To skip changing the password, set to No and proceed to Step 9.
7 Enter the new password in the New Password field.
8
Verify the new password. Re-enter the password from Step 7 into the Confirm New Password
field.
9
Click the Registration button.
IP-Filters
This scanner includes a filtering feature to limit the IP addresses that can connect to each protocol,
restricting access to specific profiles to only specified IP addresses. For example, by setting HTTP
in IP-Filters, it is possible to only allow a specific IP address to connect to the scanner home page or
Address Editor.
Up to 4 IP address ranges can be filtered for each of the following protocols.
HTTP/Address Editor, TELNET, AdminManager, TWAIN
NOTE: IP-Filters can be configured for Address Editor as well.
1 Enter the scanner's IP address into the Web browser to show the scanner home page.
2 Click System Basic Setting at the left side of the screen.
3 Click IP-Filters.
Setting Scanner from a Web Browser
5-9