Troubleshooting > Adjustment/Maintenance
Drum Refresh
Remove image blur and white dots from the printout.
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
1
2
Calibration
Using this function enables printing in the most appropriate color by adjusting hue and color drift in detail.
1
2
Laser Scanner Cleaning
Remove vertical white lines from the printout.
1
2
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Drum Refresh]
Perform the drum refresh.
Select [Start]. "Drum Refresh" begins.
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Calibration]
Perform the calibration.
Select [Start]. "Calibration" begins.
NOTE
When the hue and color drift are not enhanced even after performing calibration, refer to the
following:
Color Registration Procedure (page 10-29)
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Laser Scanner Cleaning]
Perform the laser scanner cleaning.
Select [Start]. "Laser Scanner Cleaning" begins.
10-34